Contact Us   
    Your Position: Home > Support

    Precautions about steel bar bending machine

    2015/11/28      view:

    Precautions about steel bar bending machine:

    1,When the job will need to bend rebar inserted in one end of the dial with a fixed gap, the other end is fixed and hand pressed against the body, checking body fixed indeed safe before they start on one side block reinforcement. 
    2, The job is strictly prohibited replace the mandrel and change the angle and speed and other operations, nor refuel or cleared. 
    3, Bending steel, non-mechanical processing exceeds the specified bar diameter, root number and mechanical speed. 
    4, High bending stiffness or low alloy steel, machinery nameplate should be the maximum limit for standard diameter and exchange corresponding core.